D-Link's DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement

• Compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab

• The D-Link DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper

• Up to 1.25Gb/s bi-directional data links

• Hot-pluggable SFP footprint

• Extended case temperature range

• Fully metallic enclosure for low EMI

• Low power dissipation (typical 1.2 watts)

• RJ-45 connector assembly

• Access to physical layer IC via 2-wire serial bus

• 10/100/1000 BASE-T operation in host systems with SGMII interface

• Gigabit Ethernet over Cat. 5 cable

• +3.3V electrical power interface

SPECIFICATIONS

• Standard: IEEE 802.3ab 1000BASE-T Gigabit Ethernet

• Transceiver Type: SFP (Small Form Pluggable)

• Connector: RJ-45

• Auto MDI/MDIX: Automatic crossover detection enabled, External crossover cable not required

• Data Rate: 1,000 Mbps (IEEE 802.3 compatible), 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only

• Cable Type: Cat. 5 twisted-pair cable

• Maximum Cable Distance Coverage: 100 meters

• Supply Current: 350mA (typical), 400mA (maximum), 1.3W max power over full range of voltage and temperature

• Input Voltage: 3.1V (minimum), 3.3V (typical), 3.5V (maximum)

• Maximum Voltage: 4V

• Surge Current: 30mA

• Operating Temperature: 0 to 85 C

• Storage Temp: -40 to 85 C

• Warranty: Limited Lifetime

• OEM: DGS-712