TP-LINK CPE210 2.4GHZ 300MBPS 9DBI OUTDOOR CPE

SPECIFICATIONS

• HARDWARE FEATURES

• Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc

• Memory: 64MB DDR2 RAM, 8MB Flash

• Interface: 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 Grounding Terminal, 1 Reset Button

• Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range: 16-27VDC

• Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable

• Dimensions: 224(W) x 79(D) x 60(H)mm

• Antenna Type: Built-in 9dBi 2x2 Dual-polarized Directional Antenna, Beam Width: 65 degree (H-Plane) / 35 degree (E-Plane)

• Protection: 15KV ESD Protection, 6KV Lightning Protection

• Enclosure: Outdoor ASA stabilized plastic material, IPX5 waterproof Certification

• WIRELESS FEATURES

• Wireless Standards: IEEE 802.11b/g/n (with Pharos MAXtream disabled)

• Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)

• Wireless Speeds: Up to 300Mbps (40MHz,Dynamic), Up to 144.4Mbps (20MHz,Dynamic), Up to 72.2Mbps (10MHz,Dynamic), Up to 36.1Mbps (5MHz,Dynamic)

• Frequency: 2.4 to 2.483GHz, Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used

• Transmission Power: 27dBm/500mw (Adjustable power by 1dBm), Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used

• SOFTWARE FEATURES

• Wireless Configurations: Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter, Wireless Advanced: Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

• Management: Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server

• System Tools: Wireless Signal Quality Indicators:, Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute

• System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications, Hardware watch dog

• POE ADAPTER FEATURES

• Dimensions: 110 x 57 x 33.5mm

• Input Current: 0.8A Max at 100VAC

• Input Voltage: 100VA to 240VAC at 50Hz to 60Hz

• Output: 24VDC, 1.0A Max, +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

• Efficiency: Greater than 80%

• Output Voltage: 24VDC(+4,5pins; -7,8pins)

• Input: 100-240V AC, 50/60Hz

• Power Status LEDs: 0 to 0.8A: Green, 0.8A to 1.0A: Red

• Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

• Interfaces: 1 AC Jack with Earth Ground, 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data), 1 10/100/1000Mbps Shielded Ethernet Port (Data)

• Button: Remote Reset Button

• OTHERS

• Certification: CE, FCC, RoHS, IPX5

• Package Contents: Outdoor Wireless CPE, 24V 1A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide

• System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux., Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended

• Environment: Operating Temperature: -30 to 70 Deg C, Storage Temperature: -40 to 70 Deg C, Operating Humidity: 10% to 90% non-condensing, Storage Humidity: 5% to 95% non-condensing

• OEM: NWTL-CPE210